| Quantity: | |
|---|---|
SGW5040ZXXF
Xiangnongda brand
Xiangnongda Brand SGW5040ZXXF Hook Arm Garbage Truck
1:The whole vehicle pictures are shown below
|
|
|
|
|
|
Kind reminder: The entire vehicle can be sprayed in different colors
2： The detailed parameters of the entire vehicle are as follows
【Technical parameters of the entire vehicle】 | |||
Product trademark | Xiangnongda brand | Announcement Batch | 337（Extended） |
Product name | detachable container garbage collector | Model | SGW5045ZXXF |
Total mass(Kg) | 4495 | Tank volume(m3) | |
Rated load capacity(Kg) | 2390 | External dimensions(mm) | 4750×1760×2150 |
Curb weight(Kg) | 1975 | Cargo compartment size(mm) | ×× |
Rated passenger capacity (person) | Total mass of quasi trailer (Kg) | ||
Number of passengers allowed in the cab (person) | 2 | Maximum load capacity of saddle (Kg) | |
Approach angle/departure angle (°) | 18/20 | Front suspension/rear suspension (mm) | 1115/1035 |
Axle load (Kg) | 1710/2785 | Maximum speed (Km/h) | 110 |
remarks | This vehicle is used for garbage collection and transportation, with the main specialized device being a hook arm. The side protective device is made of Q235 material and welded to the frame, while the rear protective device is made of Q235 material and welded to the frame. The cross-sectional size (width × height) is 50 × 100 (mm), and the height of the rear protective device above the ground is 450 (mm) The ABS model is CM4YL, manufactured by Guangzhou Ruili Kemi Automotive Electronics Co., Ltd. It is only equipped with a 2600mm wheelbase, and the Q23-95C60 engine corresponds to a fuel consumption value (L/100km) of 9.7. The chassis is equipped with an optional cab and spare tire position. This model can also be equipped with an ETC onboard device. | ||
【Chassis technical parameters】 | |||
Chassis Model | BJ1045V9JB3-55 | Chassis name | truck chassis |
Rand name | Futon brand | Manufacturing enterprise | Beiqi Foton Motor Co., Ltd |
Number of axles | 2 | Number of tires | 6 |
Wheelbase (mm) | 2600,2850 | ||
Tire Size | 6.00R15 10PR | ||
Number of steel plate springs | 7/5+3,7/5+2,3/5+2,2/3+2 | Front wheelbase(mm) | 1345 |
Fuel type | diesel oil | Rear wheelbase(mm) | 1292 |
Emission standards | GB17691-2018 National VI | ||
Engine model | Engine Manufacturer | displacement(ml) | efficiency(Kw) |
Q23-95C60 Q23-95E60 | Anhui Quanchai Power Co., Ltd Anhui Quanchai Power Co., Ltd | 2300 2300 | 2300 2300 |
3： Product breakdown image display
The hook arm garbage truck consists of two parts: the chassis part and the upper part. The chassis part must be purchased from Class II chassis products listed in the market sales announcement. The upper part consists of a pull arm main cylinder, an attached frame, a flip frame, support legs (optional), a locking frame, a locking cylinder, and a multi way directional valve.
4： The product features are introduced as follows
(1) Hook arm garbage truck, also known as carriage detachable garbage truck. Mainly suitable for collecting and transporting various types of garbage in municipal sanitation, property management, large factories, industrial and mining areas, and other places.
|
|
(2) Chassis configuration：
【Chassis technical parameters】 | |||
Chassis Model | BJ1045V9JB3-55 | Chassis name | truck chassis |
Rand name | Futon brand | Manufacturing enterprise | Beiqi Foton Motor Co., Ltd |
Number of axles | 2 | Number of tires | 6 |
Wheelbase (mm) | 2600,2850 | ||
Tire Size | 6.00R15 10PR | ||
Number of steel plate springs | 7/5+3,7/5+2,3/5+2,2/3+2 | Front wheelbase(mm) | 1345 |
Fuel type | diesel oil | Rear wheelbase(mm) | 1292 |
Emission standards | GB17691-2018 National VI | ||
(3)The hook arm garbage truck adopts a fully hydraulic control operating system, and the garbage compartment and chassis can be completely separated. It has the advantages of reasonable structure, easy operation, stability, high efficiency, good sealing performance, and convenient dumping. It can achieve joint operation of one vehicle and multiple garbage compartments, circular transportation, and fully improve the transportation capacity of the vehicle. Can carry multiple boxes in one car, efficient, energy-saving, and cost-effective.
|
|
|
|
5: The process display of Shandong Xiangnong production workshop is as follows
(1): Clear division of labor for assembly line operations (each process is self inspected and qualified by a dedicated person before entering the next process)!
(2): All workshop welders have welding certificates (welding technicians have more than 10 years of work experience)!
(3): Quality department (semi-finished product inspection, testing, pre spray testing, pre shipment testing, trial run inspection, qualified before leaving the factory)!
(4): Using manganese carbon steel plate raw materials and standard well-known brand accessories, fully automatic welding equipment (single-sided welding double-sided forming, resistant to solid and pressure without sand holes, false welding and leakage)!
(5) Adopting advanced sandblasting and spray coating technology (sandblasting: can remove all surface rust and other dirt, oxide layer, effectively improve the adhesion and anti-corrosion ability between the tank and the spray coating. Spray coating can make the tank display a uniform and smooth natural color, with a more beautiful appearance and good visual effect!
|
|
|
|
6、Workshop
Production Technology Explanation
（1）Sandblasting and spray coating process
1): Firstly, sandblasting process - using high-pressure high-frequency sandblasting instead of traditional sanding process, the speed of removing surface oxide layer is fast, the sanding is uniform, and there can be tens of thousands of sand holes per square meter, which can remove all dirt such as surface rust and effectively improve the adhesion and corrosion resistance of the tank body and spray coating.
2): Spray coating technology - environmentally friendly powder coating can make the tank display a uniform and smooth natural color, with a more beautiful and visually appealing appearance.
3): After being baked at a high temperature of 220 degrees Celsius, the paint booth has good adhesion, anti-corrosion, rust proof, corrosion resistance, acid and alkali resistance, moisture resistance, insulation, aging resistance, good hand feel, and a lifespan three times that of normal paint spraying.
Related videos：
（2）welding technology
1): Rolling machine process: welding is performed first, followed by plate alignment. Two sides are welded in one molding process, and then the rolled plate is rolled out. Our rolling machine is larger than those of other factories. After the rolling machine is larger, we reduce the welding seams of the middle tank body joints, because all tanks, whether it is the suction tank or the sewage tank, are not affected. They all belong to a type of pressure vessel that can withstand a certain amount of pressure. If there are more welds on a tank like this, the compressive strength will be lower. This means that the compressive strength of single-sided welding and double-sided welding is different. If the welds are normal, there are basically no additional welds on the entire plate. All pressure vessels, including many of the tanks used for chemical products, are automatically welded, and all requirements are single-sided welding with double-sided forming, because their ability to withstand pressure is the strongest. Then reduce the number of joints in the middle and increase their compressive strength. This is why ordinary welding can increase pressure by at least two pressures without any problem.
2): We have the most advanced fully automatic trigger (mainly for tank bodies), which is welded tightly inside and outside, because the sewage tank or water tank comes into contact with highly corrosive dirt, which will corrode over time. The welded area will corrode from the inside out, and cannot be repaired.
3): Advantages of fully automatic welding: One side two welding, single-sided welding with double-sided forming, uniform weld seam, strong pressure resistance (no problem within 8 pressures), no sand holes, no leakage or air leakage, only the plate welding machine can achieve this effect. (Disadvantages of manual welding: uneven welding on one side, false welding, leakage, sand hole phenomenon, if the welding joint is not tight and vacuum pressure is not applied, it is easy to leak gas, with a high risk factor). Fully automatic welding does not have this problem and has a high safety factor.
Related videos：
4): Rotating machine head welding, the head is formed by one-time stamping, and the edge is sloping to fill the weld seam and connect tightly with the welding, with strong compressive strength. (Flat surfaces are not suitable, as they have low resistance to pressure).
After docking the heads on both sides, place them on a rotating machine and rotate 360 degrees to weld the heads, which is also automatic welding. The weld seam is uniform, smooth, and aesthetically pleasing, without sand holes or false welding. (If it is manual welding, the weld seam is uneven, followed by false welding, and there are many missed welds. Because the heads on both sides are the main pressure resistant areas, the materials used for the use of the heads on both sides are very important).
5): Scissor machines are also available (even the most common small factories have them).
|
|
|
|
|
|
7、Company Qualification Introduction
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Xiangnongda Brand SGW5040ZXXF Hook Arm Garbage Truck
1:The whole vehicle pictures are shown below
|
|
|
|
|
|
Kind reminder: The entire vehicle can be sprayed in different colors
2： The detailed parameters of the entire vehicle are as follows
【Technical parameters of the entire vehicle】 | |||
Product trademark | Xiangnongda brand | Announcement Batch | 337（Extended） |
Product name | detachable container garbage collector | Model | SGW5045ZXXF |
Total mass(Kg) | 4495 | Tank volume(m3) | |
Rated load capacity(Kg) | 2390 | External dimensions(mm) | 4750×1760×2150 |
Curb weight(Kg) | 1975 | Cargo compartment size(mm) | ×× |
Rated passenger capacity (person) | Total mass of quasi trailer (Kg) | ||
Number of passengers allowed in the cab (person) | 2 | Maximum load capacity of saddle (Kg) | |
Approach angle/departure angle (°) | 18/20 | Front suspension/rear suspension (mm) | 1115/1035 |
Axle load (Kg) | 1710/2785 | Maximum speed (Km/h) | 110 |
remarks | This vehicle is used for garbage collection and transportation, with the main specialized device being a hook arm. The side protective device is made of Q235 material and welded to the frame, while the rear protective device is made of Q235 material and welded to the frame. The cross-sectional size (width × height) is 50 × 100 (mm), and the height of the rear protective device above the ground is 450 (mm) The ABS model is CM4YL, manufactured by Guangzhou Ruili Kemi Automotive Electronics Co., Ltd. It is only equipped with a 2600mm wheelbase, and the Q23-95C60 engine corresponds to a fuel consumption value (L/100km) of 9.7. The chassis is equipped with an optional cab and spare tire position. This model can also be equipped with an ETC onboard device. | ||
【Chassis technical parameters】 | |||
Chassis Model | BJ1045V9JB3-55 | Chassis name | truck chassis |
Rand name | Futon brand | Manufacturing enterprise | Beiqi Foton Motor Co., Ltd |
Number of axles | 2 | Number of tires | 6 |
Wheelbase (mm) | 2600,2850 | ||
Tire Size | 6.00R15 10PR | ||
Number of steel plate springs | 7/5+3,7/5+2,3/5+2,2/3+2 | Front wheelbase(mm) | 1345 |
Fuel type | diesel oil | Rear wheelbase(mm) | 1292 |
Emission standards | GB17691-2018 National VI | ||
Engine model | Engine Manufacturer | displacement(ml) | efficiency(Kw) |
Q23-95C60 Q23-95E60 | Anhui Quanchai Power Co., Ltd Anhui Quanchai Power Co., Ltd | 2300 2300 | 2300 2300 |
3： Product breakdown image display
The hook arm garbage truck consists of two parts: the chassis part and the upper part. The chassis part must be purchased from Class II chassis products listed in the market sales announcement. The upper part consists of a pull arm main cylinder, an attached frame, a flip frame, support legs (optional), a locking frame, a locking cylinder, and a multi way directional valve.
4： The product features are introduced as follows
(1) Hook arm garbage truck, also known as carriage detachable garbage truck. Mainly suitable for collecting and transporting various types of garbage in municipal sanitation, property management, large factories, industrial and mining areas, and other places.
|
|
(2) Chassis configuration：
【Chassis technical parameters】 | |||
Chassis Model | BJ1045V9JB3-55 | Chassis name | truck chassis |
Rand name | Futon brand | Manufacturing enterprise | Beiqi Foton Motor Co., Ltd |
Number of axles | 2 | Number of tires | 6 |
Wheelbase (mm) | 2600,2850 | ||
Tire Size | 6.00R15 10PR | ||
Number of steel plate springs | 7/5+3,7/5+2,3/5+2,2/3+2 | Front wheelbase(mm) | 1345 |
Fuel type | diesel oil | Rear wheelbase(mm) | 1292 |
Emission standards | GB17691-2018 National VI | ||
(3)The hook arm garbage truck adopts a fully hydraulic control operating system, and the garbage compartment and chassis can be completely separated. It has the advantages of reasonable structure, easy operation, stability, high efficiency, good sealing performance, and convenient dumping. It can achieve joint operation of one vehicle and multiple garbage compartments, circular transportation, and fully improve the transportation capacity of the vehicle. Can carry multiple boxes in one car, efficient, energy-saving, and cost-effective.
|
|
|
|
5: The process display of Shandong Xiangnong production workshop is as follows
(1): Clear division of labor for assembly line operations (each process is self inspected and qualified by a dedicated person before entering the next process)!
(2): All workshop welders have welding certificates (welding technicians have more than 10 years of work experience)!
(3): Quality department (semi-finished product inspection, testing, pre spray testing, pre shipment testing, trial run inspection, qualified before leaving the factory)!
(4): Using manganese carbon steel plate raw materials and standard well-known brand accessories, fully automatic welding equipment (single-sided welding double-sided forming, resistant to solid and pressure without sand holes, false welding and leakage)!
(5) Adopting advanced sandblasting and spray coating technology (sandblasting: can remove all surface rust and other dirt, oxide layer, effectively improve the adhesion and anti-corrosion ability between the tank and the spray coating. Spray coating can make the tank display a uniform and smooth natural color, with a more beautiful appearance and good visual effect!
|
|
|
|
6、Workshop
Production Technology Explanation
（1）Sandblasting and spray coating process
1): Firstly, sandblasting process - using high-pressure high-frequency sandblasting instead of traditional sanding process, the speed of removing surface oxide layer is fast, the sanding is uniform, and there can be tens of thousands of sand holes per square meter, which can remove all dirt such as surface rust and effectively improve the adhesion and corrosion resistance of the tank body and spray coating.
2): Spray coating technology - environmentally friendly powder coating can make the tank display a uniform and smooth natural color, with a more beautiful and visually appealing appearance.
3): After being baked at a high temperature of 220 degrees Celsius, the paint booth has good adhesion, anti-corrosion, rust proof, corrosion resistance, acid and alkali resistance, moisture resistance, insulation, aging resistance, good hand feel, and a lifespan three times that of normal paint spraying.
Related videos：
（2）welding technology
1): Rolling machine process: welding is performed first, followed by plate alignment. Two sides are welded in one molding process, and then the rolled plate is rolled out. Our rolling machine is larger than those of other factories. After the rolling machine is larger, we reduce the welding seams of the middle tank body joints, because all tanks, whether it is the suction tank or the sewage tank, are not affected. They all belong to a type of pressure vessel that can withstand a certain amount of pressure. If there are more welds on a tank like this, the compressive strength will be lower. This means that the compressive strength of single-sided welding and double-sided welding is different. If the welds are normal, there are basically no additional welds on the entire plate. All pressure vessels, including many of the tanks used for chemical products, are automatically welded, and all requirements are single-sided welding with double-sided forming, because their ability to withstand pressure is the strongest. Then reduce the number of joints in the middle and increase their compressive strength. This is why ordinary welding can increase pressure by at least two pressures without any problem.
2): We have the most advanced fully automatic trigger (mainly for tank bodies), which is welded tightly inside and outside, because the sewage tank or water tank comes into contact with highly corrosive dirt, which will corrode over time. The welded area will corrode from the inside out, and cannot be repaired.
3): Advantages of fully automatic welding: One side two welding, single-sided welding with double-sided forming, uniform weld seam, strong pressure resistance (no problem within 8 pressures), no sand holes, no leakage or air leakage, only the plate welding machine can achieve this effect. (Disadvantages of manual welding: uneven welding on one side, false welding, leakage, sand hole phenomenon, if the welding joint is not tight and vacuum pressure is not applied, it is easy to leak gas, with a high risk factor). Fully automatic welding does not have this problem and has a high safety factor.
Related videos：
4): Rotating machine head welding, the head is formed by one-time stamping, and the edge is sloping to fill the weld seam and connect tightly with the welding, with strong compressive strength. (Flat surfaces are not suitable, as they have low resistance to pressure).
After docking the heads on both sides, place them on a rotating machine and rotate 360 degrees to weld the heads, which is also automatic welding. The weld seam is uniform, smooth, and aesthetically pleasing, without sand holes or false welding. (If it is manual welding, the weld seam is uneven, followed by false welding, and there are many missed welds. Because the heads on both sides are the main pressure resistant areas, the materials used for the use of the heads on both sides are very important).
5): Scissor machines are also available (even the most common small factories have them).
|
|
|
|
|
|
7、Company Qualification Introduction
|
|
|
|
|
|
|
|
|
|
|
|
|
|
