| Quantity: | |
|---|---|
SGW5164GXWF
Xiangnongda brand
Xiangnongda Brand SGW5164GXWF Sewage Suction Truck
1：The whole vehicle picture is shown below
|
|
|
|
|
|
Kind reminder: The entire vehicle can be sprayed in different colors
2： The detailed parameters of the entire vehicle are as follows
【Technical parameters of the entire vehicle】 | |||
Product trademark | Xiangnongda brand | Announcement Batch | 345（extend） |
Product name | Suction sewage truck | Model | SGW5164GXWF |
Total mass(Kg) | 16000 | Tank volume(m3) | 11.0 |
Rated load capacity(Kg) | 8480 | External dimensions(mm) | 7990x2450x3350 |
Curb weight(Kg) | 7325 | Cargo compartment size(mm) | x x |
Rated passenger capacity (person) | Total mass of quasi trailer (Kg) | ||
Number of passengers allowed in the cab (person) | 3 | Maximum load capacity of saddle (Kg) | |
Approach angle/departure angle (°) | 18/13 | Front suspension/rear suspension (mm) | 1260/2230,1230/2260 |
Axle load (Kg) | 5500/10500 | Maximum speed (Km/h) | 90 |
remarks | This vehicle is equipped with a tank and pump, mainly used for sewage sludge suction, cleaning, etc. Transport medium: liquid sewage, medium density: 800 kg/cubic meter; Effective volume of tank: 11.0 cubic meters. This vehicle only has a wheelbase of 4500mm The tank size is (straight section length x diameter) (mm): 4600 × 1700. The ABS model is CM4XL-4S/4M, manufactured by Guangzhou Ruili Kemi Automotive Electronics Co., Ltd. Protection: Q235 is used for both side and rear protective materials, and the connection method with the vehicle is welding. The height of the rear protection above the ground is 435mm, and the section is 120mmX50mm. The driver's cab is optional with the chassis. The new style front grille is optional with the chassis. The front logo is optional. The new front grille and logo are optional. The new front grille, bumper, and front fog lights are optionals. | ||
【Chassis technical parameters】 | |||
Chassis Model | BJ1164VKPFA-01 | Chassis name | truck chassis |
Rand name | Futon brand | Manufacturing enterprise | Beiqi Foton Motor Co., Ltd |
Number of axles | 2 | Number of tires | 6 |
Wheelbase (mm) | 4500,4800,4300,3800,4200 | ||
Tire Size | 9.00R20 16PR,10R22.5 16PR | ||
Number of steel plate springs | 8/10+6,10/12+9 | Front wheelbase(mm) | 1740,1760,1780 |
Fuel type | diesel oil | Rear wheelbase(mm) | 1724,1728 |
Emission standards | GB3847-2005,GB17691-2018 National VI | ||
Engine model | Engine Manufacturer | displacement(ml) | efficiency(Kw) |
WP4.1NQ190E61 WP3NQ160E61 | Weichai power company limited Weichai power company limited | 4088 2970 | 140 118 |
3： Product breakdown image display
The disassembly part of the sewage suction truck includes:
Vacuum anti overflow valve、Tank lifting cylinder、Hydraulic opening rear cover、Visual tube、Tail self flow port、Suction pump system、Left operating system
4： The product features are introduced as follows
(1) A sewage suction truck is a new type of environmental sanitation vehicle that collects, transfers, and transports sludge and sewage to avoid secondary pollution. The sewage suction truck can self suction and discharge, with fast working speed, large capacity, and convenient transportation. It is suitable for collecting and transporting liquid substances such as feces, mud, and crude oil. The sewage suction truck adopts domestically advanced vacuum pumps with high suction power and long suction range, which are particularly suitable for the suction, transportation, and discharge of sediment in sewers, especially for larger objects such as mud, silt, stones, bricks, etc.
|
|
(2) Chassis configuration：
【Chassis technical parameters】 | |||
Chassis Model | BJ1164VKPFA-01 | Chassis name | truck chassis |
Rand name | Futon brand | Manufacturing enterprise | Beiqi Foton Motor Co., Ltd |
Number of axles | 2 | Number of tires | 6 |
Wheelbase (mm) | 4500,4800,4300,3800,4200 | ||
Tire Size | 9.00R20 16PR,10R22.5 16PR | ||
Number of steel plate springs | 8/10+6,10/12+9 | Front wheelbase(mm) | 1740,1760,1780 |
Fuel type | diesel oil | Rear wheelbase(mm) | 1724,1728 |
Emission standards | GB3847-2005,GB17691-2018 National VI | ||
(3)The components of the sewage suction truck include a power take-off, a transmission shaft, a vacuum sewage pump, a pressure tank, a hydraulic part, a pipe network system, a vacuum pressure gauge, a fecal window, a hand washing device, etc. The truck is equipped with a high-power vacuum sewage pump and a high-quality hydraulic system. The tank head is formed by one-time die-casting, the tank can be opened backwards, and the double top is self dumping. The dirt inside the tank can be directly dumped through the back cover, which has the characteristics of high vacuum degree (greater than the suction force of the suction truck), large tonnage, high efficiency, and wider application.
|
|
|
|
5: The process display of Shandong Xiangnong production workshop is as follows
(1): Clear division of labor for assembly line operations (each process is self inspected and qualified by a dedicated person before entering the next process)!
(2): All workshop welders have welding certificates (welding technicians have more than 10 years of work experience)!
(3): Quality department (semi-finished product inspection, testing, pre spray testing, pre shipment testing, trial run inspection, qualified before leaving the factory)!
(4): Using manganese carbon steel plate raw materials and standard well-known brand accessories, fully automatic welding equipment (single-sided welding double-sided forming, resistant to solid and pressure without sand holes, false welding and leakage)!
(5) Adopting advanced sandblasting and spray coating technology (sandblasting: can remove all surface rust and other dirt, oxide layer, effectively improve the adhesion and anti-corrosion ability between the tank and the spray coating. Spray coating can make the tank display a uniform and smooth natural color, with a more beautiful appearance and good visual effect!
|
|
|
|
6、Workshop
Production Technology Explanation
（1）Sandblasting and spray coating process
1): Firstly, sandblasting process - using high-pressure high-frequency sandblasting instead of traditional sanding process, the speed of removing surface oxide layer is fast, the sanding is uniform, and there can be tens of thousands of sand holes per square meter, which can remove all dirt such as surface rust and effectively improve the adhesion and corrosion resistance of the tank body and spray coating.
2): Spray coating technology - environmentally friendly powder coating can make the tank display a uniform and smooth natural color, with a more beautiful and visually appealing appearance.
3): After being baked at a high temperature of 220 degrees Celsius, the paint booth has good adhesion, anti-corrosion, rust proof, corrosion resistance, acid and alkali resistance, moisture resistance, insulation, aging resistance, good hand feel, and a lifespan three times that of normal paint spraying.
Related videos：
（2）welding technology
1): Rolling machine process: welding is performed first, followed by plate alignment. Two sides are welded in one molding process, and then the rolled plate is rolled out. Our rolling machine is larger than those of other factories. After the rolling machine is larger, we reduce the welding seams of the middle tank body joints, because all tanks, whether it is the suction tank or the sewage tank, are not affected. They all belong to a type of pressure vessel that can withstand a certain amount of pressure. If there are more welds on a tank like this, the compressive strength will be lower. This means that the compressive strength of single-sided welding and double-sided welding is different. If the welds are normal, there are basically no additional welds on the entire plate. All pressure vessels, including many of the tanks used for chemical products, are automatically welded, and all requirements are single-sided welding with double-sided forming, because their ability to withstand pressure is the strongest. Then reduce the number of joints in the middle and increase their compressive strength. This is why ordinary welding can increase pressure by at least two pressures without any problem.
2): We have the most advanced fully automatic trigger (mainly for tank bodies), which is welded tightly inside and outside, because the sewage tank or water tank comes into contact with highly corrosive dirt, which will corrode over time. The welded area will corrode from the inside out, and cannot be repaired.
3): Advantages of fully automatic welding: One side two welding, single-sided welding with double-sided forming, uniform weld seam, strong pressure resistance (no problem within 8 pressures), no sand holes, no leakage or air leakage, only the plate welding machine can achieve this effect. (Disadvantages of manual welding: uneven welding on one side, false welding, leakage, sand hole phenomenon, if the welding joint is not tight and vacuum pressure is not applied, it is easy to leak gas, with a high risk factor). Fully automatic welding does not have this problem and has a high safety factor.
Related videos：
4): Rotating machine head welding, the head is formed by one-time stamping, and the edge is sloping to fill the weld seam and connect tightly with the welding, with strong compressive strength. (Flat surfaces are not suitable, as they have low resistance to pressure).
After docking the heads on both sides, place them on a rotating machine and rotate 360 degrees to weld the heads, which is also automatic welding. The weld seam is uniform, smooth, and aesthetically pleasing, without sand holes or false welding. (If it is manual welding, the weld seam is uneven, followed by false welding, and there are many missed welds. Because the heads on both sides are the main pressure resistant areas, the materials used for the use of the heads on both sides are very important).
5): Scissor machines are also available (even the most common small factories have them).
|
|
|
|
|
|
7、Company Qualification Introduction
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Xiangnongda Brand SGW5164GXWF Sewage Suction Truck
1：The whole vehicle picture is shown below
|
|
|
|
|
|
Kind reminder: The entire vehicle can be sprayed in different colors
2： The detailed parameters of the entire vehicle are as follows
【Technical parameters of the entire vehicle】 | |||
Product trademark | Xiangnongda brand | Announcement Batch | 345（extend） |
Product name | Suction sewage truck | Model | SGW5164GXWF |
Total mass(Kg) | 16000 | Tank volume(m3) | 11.0 |
Rated load capacity(Kg) | 8480 | External dimensions(mm) | 7990x2450x3350 |
Curb weight(Kg) | 7325 | Cargo compartment size(mm) | x x |
Rated passenger capacity (person) | Total mass of quasi trailer (Kg) | ||
Number of passengers allowed in the cab (person) | 3 | Maximum load capacity of saddle (Kg) | |
Approach angle/departure angle (°) | 18/13 | Front suspension/rear suspension (mm) | 1260/2230,1230/2260 |
Axle load (Kg) | 5500/10500 | Maximum speed (Km/h) | 90 |
remarks | This vehicle is equipped with a tank and pump, mainly used for sewage sludge suction, cleaning, etc. Transport medium: liquid sewage, medium density: 800 kg/cubic meter; Effective volume of tank: 11.0 cubic meters. This vehicle only has a wheelbase of 4500mm The tank size is (straight section length x diameter) (mm): 4600 × 1700. The ABS model is CM4XL-4S/4M, manufactured by Guangzhou Ruili Kemi Automotive Electronics Co., Ltd. Protection: Q235 is used for both side and rear protective materials, and the connection method with the vehicle is welding. The height of the rear protection above the ground is 435mm, and the section is 120mmX50mm. The driver's cab is optional with the chassis. The new style front grille is optional with the chassis. The front logo is optional. The new front grille and logo are optional. The new front grille, bumper, and front fog lights are optionals. | ||
【Chassis technical parameters】 | |||
Chassis Model | BJ1164VKPFA-01 | Chassis name | truck chassis |
Rand name | Futon brand | Manufacturing enterprise | Beiqi Foton Motor Co., Ltd |
Number of axles | 2 | Number of tires | 6 |
Wheelbase (mm) | 4500,4800,4300,3800,4200 | ||
Tire Size | 9.00R20 16PR,10R22.5 16PR | ||
Number of steel plate springs | 8/10+6,10/12+9 | Front wheelbase(mm) | 1740,1760,1780 |
Fuel type | diesel oil | Rear wheelbase(mm) | 1724,1728 |
Emission standards | GB3847-2005,GB17691-2018 National VI | ||
Engine model | Engine Manufacturer | displacement(ml) | efficiency(Kw) |
WP4.1NQ190E61 WP3NQ160E61 | Weichai power company limited Weichai power company limited | 4088 2970 | 140 118 |
3： Product breakdown image display
The disassembly part of the sewage suction truck includes:
Vacuum anti overflow valve、Tank lifting cylinder、Hydraulic opening rear cover、Visual tube、Tail self flow port、Suction pump system、Left operating system
4： The product features are introduced as follows
(1) A sewage suction truck is a new type of environmental sanitation vehicle that collects, transfers, and transports sludge and sewage to avoid secondary pollution. The sewage suction truck can self suction and discharge, with fast working speed, large capacity, and convenient transportation. It is suitable for collecting and transporting liquid substances such as feces, mud, and crude oil. The sewage suction truck adopts domestically advanced vacuum pumps with high suction power and long suction range, which are particularly suitable for the suction, transportation, and discharge of sediment in sewers, especially for larger objects such as mud, silt, stones, bricks, etc.
|
|
(2) Chassis configuration：
【Chassis technical parameters】 | |||
Chassis Model | BJ1164VKPFA-01 | Chassis name | truck chassis |
Rand name | Futon brand | Manufacturing enterprise | Beiqi Foton Motor Co., Ltd |
Number of axles | 2 | Number of tires | 6 |
Wheelbase (mm) | 4500,4800,4300,3800,4200 | ||
Tire Size | 9.00R20 16PR,10R22.5 16PR | ||
Number of steel plate springs | 8/10+6,10/12+9 | Front wheelbase(mm) | 1740,1760,1780 |
Fuel type | diesel oil | Rear wheelbase(mm) | 1724,1728 |
Emission standards | GB3847-2005,GB17691-2018 National VI | ||
(3)The components of the sewage suction truck include a power take-off, a transmission shaft, a vacuum sewage pump, a pressure tank, a hydraulic part, a pipe network system, a vacuum pressure gauge, a fecal window, a hand washing device, etc. The truck is equipped with a high-power vacuum sewage pump and a high-quality hydraulic system. The tank head is formed by one-time die-casting, the tank can be opened backwards, and the double top is self dumping. The dirt inside the tank can be directly dumped through the back cover, which has the characteristics of high vacuum degree (greater than the suction force of the suction truck), large tonnage, high efficiency, and wider application.
|
|
|
|
5: The process display of Shandong Xiangnong production workshop is as follows
(1): Clear division of labor for assembly line operations (each process is self inspected and qualified by a dedicated person before entering the next process)!
(2): All workshop welders have welding certificates (welding technicians have more than 10 years of work experience)!
(3): Quality department (semi-finished product inspection, testing, pre spray testing, pre shipment testing, trial run inspection, qualified before leaving the factory)!
(4): Using manganese carbon steel plate raw materials and standard well-known brand accessories, fully automatic welding equipment (single-sided welding double-sided forming, resistant to solid and pressure without sand holes, false welding and leakage)!
(5) Adopting advanced sandblasting and spray coating technology (sandblasting: can remove all surface rust and other dirt, oxide layer, effectively improve the adhesion and anti-corrosion ability between the tank and the spray coating. Spray coating can make the tank display a uniform and smooth natural color, with a more beautiful appearance and good visual effect!
|
|
|
|
6、Workshop
Production Technology Explanation
（1）Sandblasting and spray coating process
1): Firstly, sandblasting process - using high-pressure high-frequency sandblasting instead of traditional sanding process, the speed of removing surface oxide layer is fast, the sanding is uniform, and there can be tens of thousands of sand holes per square meter, which can remove all dirt such as surface rust and effectively improve the adhesion and corrosion resistance of the tank body and spray coating.
2): Spray coating technology - environmentally friendly powder coating can make the tank display a uniform and smooth natural color, with a more beautiful and visually appealing appearance.
3): After being baked at a high temperature of 220 degrees Celsius, the paint booth has good adhesion, anti-corrosion, rust proof, corrosion resistance, acid and alkali resistance, moisture resistance, insulation, aging resistance, good hand feel, and a lifespan three times that of normal paint spraying.
Related videos：
（2）welding technology
1): Rolling machine process: welding is performed first, followed by plate alignment. Two sides are welded in one molding process, and then the rolled plate is rolled out. Our rolling machine is larger than those of other factories. After the rolling machine is larger, we reduce the welding seams of the middle tank body joints, because all tanks, whether it is the suction tank or the sewage tank, are not affected. They all belong to a type of pressure vessel that can withstand a certain amount of pressure. If there are more welds on a tank like this, the compressive strength will be lower. This means that the compressive strength of single-sided welding and double-sided welding is different. If the welds are normal, there are basically no additional welds on the entire plate. All pressure vessels, including many of the tanks used for chemical products, are automatically welded, and all requirements are single-sided welding with double-sided forming, because their ability to withstand pressure is the strongest. Then reduce the number of joints in the middle and increase their compressive strength. This is why ordinary welding can increase pressure by at least two pressures without any problem.
2): We have the most advanced fully automatic trigger (mainly for tank bodies), which is welded tightly inside and outside, because the sewage tank or water tank comes into contact with highly corrosive dirt, which will corrode over time. The welded area will corrode from the inside out, and cannot be repaired.
3): Advantages of fully automatic welding: One side two welding, single-sided welding with double-sided forming, uniform weld seam, strong pressure resistance (no problem within 8 pressures), no sand holes, no leakage or air leakage, only the plate welding machine can achieve this effect. (Disadvantages of manual welding: uneven welding on one side, false welding, leakage, sand hole phenomenon, if the welding joint is not tight and vacuum pressure is not applied, it is easy to leak gas, with a high risk factor). Fully automatic welding does not have this problem and has a high safety factor.
Related videos：
4): Rotating machine head welding, the head is formed by one-time stamping, and the edge is sloping to fill the weld seam and connect tightly with the welding, with strong compressive strength. (Flat surfaces are not suitable, as they have low resistance to pressure).
After docking the heads on both sides, place them on a rotating machine and rotate 360 degrees to weld the heads, which is also automatic welding. The weld seam is uniform, smooth, and aesthetically pleasing, without sand holes or false welding. (If it is manual welding, the weld seam is uneven, followed by false welding, and there are many missed welds. Because the heads on both sides are the main pressure resistant areas, the materials used for the use of the heads on both sides are very important).
5): Scissor machines are also available (even the most common small factories have them).
|
|
|
|
|
|
7、Company Qualification Introduction
|
|
|
|
|
|
|
|
|
|
|
|
|
|
