Home / Products / Garbage Truck / 12 Cubic Garbage Trucks / 12 Square Multifunctional Sprinkler Truck

12 Square Multifunctional Sprinkler Truck

The main special devices of the vehicle are liquid storage tank and spray device; The main purpose is to suppress dust and reduce haze. Transport medium: water, medium density: 1000 kg/cubic meter. The effective volume of the tank is 10 cubic meters. The tank size is (length x long axis x short axis) (mm): 4230X2290X1440. ABS system manufacturer: Changchun Ruili Kemi Automotive Electronics Co., Ltd., model: CM4XL. Protection: Q235 is used for both side and rear protective materials, and the connection method with the vehicle is welding. Rear protection: the ground clearance is 435mm, and the section is 120mmX60mm. Only 4000mm wheelbase is selected.
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
  • SGW5161TDYCA6

  • Xiangnongda brand

Xiangnongda Brand SGW5161TDYCA6 Multi Functional Dust Suppression Vehicle

1:The whole vehicle pictures are shown below


Kind reminder: The entire vehicle can be sprayed in different colors


2: The detailed parameters of the entire vehicle are as follows

【Technical parameters of the entire vehicle】

Product trademark

Xiangnongda brand

Announcement Batch

348

Product name

Multi functional dust suppression vehicle

Model

SGW5161TDYCA6

Total mass(Kg)

16200

Tank volume(m3)

10

Rated load capacity(Kg)

9590,9525

External dimensions(mm)

7800x2500x2950,3050

Curb weight(Kg)

6480

Cargo compartment size(mm)

××

Rated passenger capacity (person)


Total mass of quasi trailer (Kg)


Number of passengers allowed in the cab (person)

2,3

Maximum load capacity of saddle (Kg)


Approach angle/departure angle (°)

17/12

Front suspension/rear suspension (mm)

1400/2400

Axle load (Kg)

6000/10200

Maximum speed (Km/h)

89

remarks

The main special devices of the vehicle are liquid storage tank and spray device; The main purpose is to suppress dust and reduce haze. Transport medium: water, medium density: 1000 kg/cubic meter. The effective volume of the tank is 10 cubic meters. The tank size is (length x long axis x short axis) (mm): 4230X2290X1440. ABS system manufacturer: Changchun Ruili Kemi Automotive Electronics Co., Ltd., model: CM4XL. Protection: Q235 is used for both side and rear protective materials, and the connection method with the vehicle is welding. Rear protection: the ground clearance is 435mm, and the section is 120mmX60mm. Only 4000mm wheelbase is selected.

【Chassis technical parameters】

Chassis Model

CA1160P62K1L2A2E6Z

Chassis name

truck chassis

Rand name

Dongfeng brand

Manufacturing enterprise

China FAW Group Co., Ltd

Number of axles

2

Number of tires

6

Wheelbase (mm)

4000,4200,5000

Tire Size

9.00R20,10.00R20,10R22.5

Number of steel plate springs

10/7+6,7/7+6,10/12+8

Front wheelbase(mm)

1800,1827,1950

Fuel type

diesel oil

Rear wheelbase(mm)

1860,1800

Emission standards

GB3847-2005,GB17691-2018 National VI

Engine model

Engine Manufacturer

displacement(ml)

efficiency(Kw)

CA6DH1-22E6


CA4DK1-18E6


CA4DH1-18E6


CA4DK1-22E6


CA4DK1-18E61


CA4DK1-22E61


CA6DH1-22E61


CA6DH1-24E61



China FAW Group Co., Ltd

China FAW Group Co., Ltd

China FAW Group Co., Ltd

China FAW Group Co., Ltd

China FAW Group Co., Ltd

China FAW Group Co., Ltd

China FAW Group Co., Ltd

China FAW Group Co., Ltd

5700


4764


3800


4764


4764


4764


5700


5700

165


139


132


165


139


165


165


179

3: Product breakdown image display

Dust suppression vehicles are mainly composed of car chassis, water tank, and fog cannon machine.

4: The product features are introduced as follows

(1) Dust suppression vehicle, also known as spray vehicle and sprinkler, is an environmental protection vehicle used for dust reduction, noise reduction and cooling. Dust suppression vehicle is widely used in urban sanitation, road cleaning, railway maintenance, mine dust reduction and other fields.


(2) Chassis configuration:

【Chassis technical parameters】

Chassis Model

CA1160P62K1L2A2E6Z

Chassis name

truck chassis

Rand name

Dongfeng brand

Manufacturing enterprise

China FAW Group Co., Ltd

Number of axles

2

Number of tires

6

Wheelbase (mm)

4000,4200,5000

Tire Size

9.00R20,10.00R20,10R22.5

Number of steel plate springs

10/7+6,7/7+6,10/12+8

Front wheelbase(mm)

1800,1827,1950

Fuel type

diesel oil

Rear wheelbase(mm)

1860,1800

Emission standards

GB3847-2005,GB17691-2018 National VI


(3)The main function of dust suppression vehicles is to minimize harmful substances such as dust, pollutants, and odors during construction, ensuring people's physical health and environmental hygiene. In addition, dust suppression vehicles can also achieve effects such as suppressing suspended fine particles and reducing noise during vehicle operation by spraying water in conjunction with road cleaning. The dust suppression vehicle uses a water pump and a spray system. After mixing water and the liquid added with chemicals, it can spray to form a water mist, which can reduce dust, noise and clean the road of suspended particles in the air. At the same time, the urban heat island effect can be improved by cooling the air temperature, achieving a cool and cooling effect.

5: The process display of Shandong Xiangnong production workshop is as follows

(1): Clear division of labor for assembly line operations (each process is self inspected and qualified by a dedicated person before entering the next process)!


(2): All workshop welders have welding certificates (welding technicians have more than 10 years of work experience)!


(3): Quality department (semi-finished product inspection, testing, pre spray testing, pre shipment testing, trial run inspection, qualified before leaving the factory)!


(4): Using manganese carbon steel plate raw materials and standard well-known brand accessories, fully automatic welding equipment (single-sided welding double-sided forming, resistant to solid and pressure without sand holes, false welding and leakage)!


(5) Adopting advanced sandblasting and spray coating technology (sandblasting: can remove all surface rust and other dirt, oxide layer, effectively improve the adhesion and anti-corrosion ability between the tank and the spray coating. Spray coating can make the tank display a uniform and smooth natural color, with a more beautiful appearance and good visual effect!


6、Workshop

Production Technology Explanation

(1)Sandblasting and spray coating process

1): Firstly, sandblasting process - using high-pressure high-frequency sandblasting instead of traditional sanding process, the speed of removing surface oxide layer is fast, the sanding is uniform, and there can be tens of thousands of sand holes per square meter, which can remove all dirt such as surface rust and effectively improve the adhesion and corrosion resistance of the tank body and spray coating.


2): Spray coating technology - environmentally friendly powder coating can make the tank display a uniform and smooth natural color, with a more beautiful and visually appealing appearance.


3): After being baked at a high temperature of 220 degrees Celsius, the paint booth has good adhesion, anti-corrosion, rust proof, corrosion resistance, acid and alkali resistance, moisture resistance, insulation, aging resistance, good hand feel, and a lifespan three times that of normal paint spraying.

Related videos:




(2)welding technology

1): Rolling machine process: welding is performed first, followed by plate alignment. Two sides are welded in one molding process, and then the rolled plate is rolled out. Our rolling machine is larger than those of other factories. After the rolling machine is larger, we reduce the welding seams of the middle tank body joints, because all tanks, whether it is the suction tank or the sewage tank, are not affected. They all belong to a type of pressure vessel that can withstand a certain amount of pressure. If there are more welds on a tank like this, the compressive strength will be lower. This means that the compressive strength of single-sided welding and double-sided welding is different. If the welds are normal, there are basically no additional welds on the entire plate. All pressure vessels, including many of the tanks used for chemical products, are automatically welded, and all requirements are single-sided welding with double-sided forming, because their ability to withstand pressure is the strongest. Then reduce the number of joints in the middle and increase their compressive strength. This is why ordinary welding can increase pressure by at least two pressures without any problem.


2): We have the most advanced fully automatic trigger (mainly for tank bodies), which is welded tightly inside and outside, because the sewage tank or water tank comes into contact with highly corrosive dirt, which will corrode over time. The welded area will corrode from the inside out, and cannot be repaired.


3): Advantages of fully automatic welding: One side two welding, single-sided welding with double-sided forming, uniform weld seam, strong pressure resistance (no problem within 8 pressures), no sand holes, no leakage or air leakage, only the plate welding machine can achieve this effect. (Disadvantages of manual welding: uneven welding on one side, false welding, leakage, sand hole phenomenon, if the welding joint is not tight and vacuum pressure is not applied, it is easy to leak gas, with a high risk factor). Fully automatic welding does not have this problem and has a high safety factor.

Related videos:



4): Rotating machine head welding, the head is formed by one-time stamping, and the edge is sloping to fill the weld seam and connect tightly with the welding, with strong compressive strength. (Flat surfaces are not suitable, as they have low resistance to pressure).

After docking the heads on both sides, place them on a rotating machine and rotate 360 degrees to weld the heads, which is also automatic welding. The weld seam is uniform, smooth, and aesthetically pleasing, without sand holes or false welding. (If it is manual welding, the weld seam is uneven, followed by false welding, and there are many missed welds. Because the heads on both sides are the main pressure resistant areas, the materials used for the use of the heads on both sides are very important).


5): Scissor machines are also available (even the most common small factories have them).


7、Company Qualification Introduction






Previous: 
Next: 
ABOUT US
Shandong Xiangnong Special Vehicle Co., Ltd. was established in 2002 and is located in Jiaxiang County, Shandong Province, the hometown of Zengzi. We are a high-tech enterprise that integrates the research and development, production, and sales of sanitation vehicles.

QUICK LINK

PRODUCTS CATEGORY

CONTACT US
 Huanggai Industrial Park,Huanggai Town,Jiaxiang County,Jining City,Shandong Province,China
 admin@sdxiangnong.com
 +86-15554444199
鲁ICP备16041966号-12  Copyright © 2024 Shandong Xiangnong Special Vehicle Co., Ltd All Rights Reserved | Sitemap